§ 6604.2. Layout of Rebounding Tumbling Equipment.  


Latest version.
  • Rebound tumbling equipment shall be located on a level surface in such a way as to be within view of the operator or attendant at all times.

    The spacing of equipment units shall conform to the following minimum dimensions as measured from the inside edge of the frame:

    1.

    Three feet (914 mm) between sides of units.

    2.

    Four feet (1219 mm) between ends of units.

    3.

    Five feet (1524 mm) from ends to nearest fence, building or other similar construction.

    4.

    Three feet (914 mm) from sides or corners to nearest fence, building or other similar construction.

    The area surrounding the rebound tumbling equipment shall be surfaced to prevent a dust nuisance and have a reasonably level surface of pea gravel or equivalent type of material from a safety and dust control standpoint.

(Ord. 2016-0053 § 71, 2016; Ord. 99-0040 § 68 (part), 1999.)